Ford C-Max Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi , 2005 C Max glow plug problem, on starting or attempting to the glow plug symbol illuminates for about a half second, then if cold it's a pig to start , once running all else is fine , had a diagnostic done , changed glow plug relay module , same fault existed, still had to pay for labour and failed incorrect diagnosis , error code gives glow plug circuit fault , didn't need a computer to arrive at that!!!! So chaps what determines the time the relay stays on for , can hear it pulling in , is there a current sensor or a thermal sensor , also if I measure resistance from power contact of relay socket to glow plugs what sort of resistance should I expect , is there a way of accessing the glowplug loom connector without removing wiper arms and associated plastic valance ,
Thanks in advance
Chris
 
1 - 2 of 2 Posts
Top