Ford C-Max Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi,

I've recently acquired an 06 C-Max and have bought the Ford sunglasses holder to go above the driver's side window.

I've removed the blanking plates from the interior roof.

Do I now need to drill two holes and secure the holder with a couple of self-tapping screws? There appears to be a metal bracket inside the recess where the holder fits, but it didn't come with any installation hardware so I just wanted to check that I wasn't going to see sunlight if I started drilling in there


TIA for any advice
 

·
Registered
Joined
·
7,765 Posts
I suspect those blanking plugs are where the grab handle would go for LHD (foreign models) It may be that the glasses holder fits with the same. It may be a case of using the exploded dealer diagrams and the options
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Yes, the blanking plugs are in the same position as the mounting points for the handle on the passenger side. I'll have a look at how that handle is secured as I'd imagine the glasses holder should use the same means.
 
1 - 3 of 3 Posts
Top