Ford C-Max Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
This may be common knowledge but in case it isn't....

1. To enterthe instrument cluster self-diagnostic mode simultaneously depress and hold the tripmeter reset button then turn the ignition switch to position II or III.
2. Release the tripmeter reset button when TEST is displayed on the LCD. This will take between 5 and 8 seconds.
3. Depress the RESET button to move to navigate/perform various self diagnostic tests (inc DTC codes).
 

·
Registered
Joined
·
2,402 Posts
Good fun especially if you leave it in digital speedo mode,but don`t forget to watch the road too.
MM
 
1 - 2 of 2 Posts
Top