Ford C-Max Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Hi all,


Please can someone help? I'm trying to remove the dashboard cover on my 54 reg Cmax ghia. Basically, my son has dropped some bits from his starwars figures (!!!) down the windscreen ventilation grilles at the front. So I was hoping I might be able to get to them by removing the dash cover. I've undone the 4 torx screws but the thing still won't budge.


Any ideas?
 

·
Registered
Joined
·
2,402 Posts
Hi Seb,welcome to the club.I don`t know if I`ll be able to help,but I `ll do some poking about & get back to you.Richard G may be able to help when he`s read your post.MM
 

·
Registered
Joined
·
615 Posts
Hi SEB welcome to the club. If you have removed the dash cover you then should remove the cover on the drivers side just pull it it only clips on. There are screws all the way along the dash if you remove them I am not 100% sure butI think the top section of the dash then comes off.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #4
mjshort79 said:
Hi SEB welcome to the club. If you have removed the dash cover you then should remove the cover on the drivers side just pull it it only clips on. There are screws all the way along the dash if you remove them I am not 100% sure butI think the top section of the dash then comes off.
Yeh, I've pulled off the clip on bit on the drivers side, and removed all the screws I can see (4 in all) but the dash cover just won't budge.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #5
I still haven't sussed this out. Had another go at removing all the screws, but the thing just won't budge! Anyone else got any ideas?
 
1 - 5 of 5 Posts
Top