Ford C-Max Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello all

Recently brought myself a 58 plate C-max 1.8 desiel via a private sale, and unfortunatly a week later it started complaining about a "power steering failure" :(

Anyhow, the power steering continues to work fine and via Forscan i can see it showing a C1956 error code, which points to the sensor.

From some research i was able to get a second hand sensor and swap the unit out (fairly easy job) but unfortunatly the error remains.

My question is - do i need to reset anything or recalibrate anything electronicly after swapping the sensor ?. I wasn't able to do a EPS reset via Forscan (said it wasn't supported).

Any advice welcome !
Cheers
Tris
 

·
Registered
Joined
·
3 Posts
Hi Tris,

Did this sort the problem? I have the same issue and like you have change the sensor and got the same result.

Cheers,

Paul
 
1 - 3 of 3 Posts
Top